Skinny Mini Fireplace

Multi fuel burner/heater, wood and coal (please note for coal you will need to purchase a burn plate that sits in the bottom of the fire so the air can get below and to make the bottom of the fire last longer using hot coal you can also use this for the wood to you can add to cart from the website listings fire accessories)

NOW IN STOCK (black versions)

If sold out then the turn around time is 1-3 weeks depending, it can vary as orders come and go, you can message or call me for accurate time

Mini fire places perfect for house buses, tiny homes, cabins, camping, tents, decks, patios, indoor or outdoor, caravans or campers, sheds & man caves, sleep outs etc,

Made by hand in New Zealand out of thick 3mm Corten steel, AKA weathering steel and some stainless steel

Only slightly grinding the welds on these to save time which saves you money, it also adds a lot of strength.

Wet backs (copper) for heating water effectively available for added $250

around 5KW to 7KW peak heat output
baffle plate.
You can cook on the top of these to just limited space, around 150mm x 150mm enough for a small pan or pot.
Airflow adjustment.
Comes finished in high heat black paint.
Wooden handles (Rimi)
Tempered fire glass so you can watch it burn away and see when you need to add wood.
Small shelve below to space it up off the ground to let the fire box breath and dry your wood in the shelve

Dimensions:
155mm wide x 305mm deep & 505mm high
75mm/3inch diameter flue, sticks out/up 90mm above the fireplace ready to hook up to flue kit. Total height with flue exit is 595mm

weight: 16kgs

Awesome mini fires at awesome value, nothing on the market better for even close to the price of these, unbeatable value & quality

Corten steel can last upwards of 100 years without paint, it rusts a thick layer acting better then any paint would, sealing itself from rusting further once fully weather, but we paint it as well so these should last a few lifetimes, and if you scratch paint off over time you don’t have to worry either,

Like a lot of smaller fires these pull air in from inside the room, we have tested these to work without door & window seals, the slight flow of air that would leak in (so small you can’t see by eye) is the slow speed, so it doesn’t go out when you close the vent right off, saving you money by avoiding adding complicated channels & seals which almost doubles the cost, but there tested & just as safe and nothing can come back out so there perfectly safe!

These fires are classed as untested appliances and therefore are made for places that don’t require a permit they are not untested or unsafe, just untested by the official labs, they may still be able to get permitted depending on your councils rules, they are classed as multi fuel heaters so are excluded from the emissions act and only need to meet building code for permitted installations.

Don’t forget to add your flue kit, wet back option or burn plate if required.